Condensation can turn a bathroom into a mold factory that ruins tile and triggers allergies. DewStop's weather-prediction software turns on the bathroom fan when temperature and humidity levels get too high, and it predicts how long the fan should run based on how much water vapor is in the air, so the fan won't waste energy or shut off too quickly. And whereas other detectors require installing a new ventilation system, DewStop easily connects to existing bathroom fans.
~Popular Science Magazine

Slide item 1

No More Mold - Mold can wreak havoc in any home, causing harm to the entire family, but now there is a new automatic fan switch called DewStop to help solve that issue. The DewStop senses steam and moisture and automatically offers ventilation. It turns on and off when needed to stop the spread of mold. The DewStop is simple to install and can be found at Ace Hardware.
~Parent Guide News

Slide item 2

Even if you can't embark on a major remodel, you can still go green in your bath. Reduce the energy used by your bath's existing vent fan with DewStop, an easy-to-install switch that monitors humidity levels and turns the fan on and off as needed.
~Better Homes and Gardens
Kitchen+Bath Makeovers

Slide item 3

 

CONTROLS

FS-300
Click to Rotate

 

$49.00

BUY

DewStop Adjustable

FS-300   Bathroom Condensation Control

Healthy Home Product™

About

  Blue LED Light, Adjustable DewStop Sensor, Adjustable Fan Timer On, Fan Off

Electrical Input: 120 volts @ 60Hz
Maximum Fan Load: 1/8th hp or 3 amps

Best for use in: bathrooms, laundry rooms, sun rooms, spa rooms
May be used to comply with:
ASHRAE 62.2, Energy Star, LEED, Title 24, CalGreen

USA Patent No. US 9,360,228 B2, other USA and international patents pending

Features & Benefits

CONDENSATION SENSORS (adjustable)

- Turns ON the fan when condensation is present and OFF when dry

- Adjust sensors to solve moisture problem

- Helps fight mold
 

QUE™ TECHNOLOGY

- Ultra moisture-sensing adaptive technology (patent pending)
 

COUNTDOWN TIMER (adjustable)

- You choose how long your fan will run

- Great for tenant and family use
 

MANUAL ON/OFF CONTROL

- Manual fan control for immediate ventilation
 

LED FAN INDICATOR LIGHT

- Lets you know the fan is ON
 

CONCEALED ADJUSTMENT SETTINGS

- Tamper-proof settings cover
 

Installation

 

Easy Install, Quick as 1-2-3: Remove, Connect, Done

FAQ

I only have two black wires, how do I properly connect DewStop?

- One of those wires is in coming power and one is power to the fan. Please refer to the instruction manual for proper wiring of DewStop. Here is the link to the manual.

I do not have a white neutral wire, will DewStop still work without it?

- DewStop fan switch does need a white neutral to operate. Generally there is a type of neutral wire available in your junction box (wall box). Older homes or homes where code was not followed can make it a problem to find a neutral. You will need good knowledge of electrical and an electrical testing device to find a neutral wire. We strongly suggest you use a Licensed and Bonded electrician for this task.

How do I set DewStop's sensitivity for my specific bathroom?

- DewStop comes preset at the 12:00 o'clock position. This is the best place to start. For further instruction on setting your sensitivity levels, please refer to the manual included with your DewStop switch.

The fan comes on too early/too frequently. How can I fix this?

- This means DewStop is set to a higher sensitivity level. Simply turn the sensitivity dial counterclockwise slightly to reduce sensitivity. We suggest small increments at a time.

The fan doesn't come on soon enough, there is already moisture on the walls by the time the fan comes on. How do I fix this?

- If you want DewStop to come on faster, you can rotate the sensitivity dial clockwise. Now DewStop is more sensitive. Move to the right again if needed but only move in small increments until you find the right setting.

I occasionally like to steam up my bathroom. Is it possible to disable the sensor?

- Yes! You can disable the sensing of moisture. Make sure the fan is OFF. Now push down and hold down the button for 15 seconds, then release the button. Moisture sensitivity is now disabled.

If I disable the sensor, can I still turn the fan on/off manually?

- Yes! You can turn ON and OFF your fan manually. Now the fan switch is a manual ON OFF and the timer will continue to work.

How do I turn the sensor back on?

- Yes! It’s easy to turn the moisture sensing back ON. Make sure the fan is OFF. Now push down and hold down the button for 15 seconds, then release the button. Now the moisture sensor is able to detect moisture again.

I use an air conditioner during the day in the summer, then turn it off at night. When I do this, my fan comes on. What is happening?

- Sometimes when the air conditioning is turned OFF the house will start to attract moisture and this is similar to taking a shower or bath. DewStop senses this and turns ON the bath fan. You can avoid this by reducing the sensitivity level. To do this, rotate the dial counterclockwise. We suggest small increments at a time.

The blue LED light is pulsing. What does this mean?

- The pulsing is telling you that DewStop sees moisture and DewStop is running the fan to remove the moisture. When the blue LED is solid (not pulsing on/off the fan is ON and in manual timer mode or in DewStop drying mode. Note: When DewStop senses moisture it will run the fan as long as it takes to dry the room back to the level it saw your room at prior to the moisture. After a shower or bath this is typically 25-35 minutes. THE MANUAL TIMER SETTING DOES NOT CHANGE THE DRYING TIME, it is important that your room is properly dried. The manual timer is for smell removal time only.

I lost my adjustment tool that came with DewStop. Can I use a screw driver to make adjustments?

- Yes you can use any small tool but be careful not to break the small sensitivity and time dials with a large screw driver tool.

What happens if someone turns the fan off before the room is properly dried out?

- DewStop knows your room needs to be dry and if someone turns OFF DewStop its OK. DewStop will sense the moisture again after one minute and turn back ON to finish drying the room.

If I set my Countdown Timer to 5 minutes, does that mean that the fan will only run for 5 minutes when moisture is detected?

- No. The timer is for smell removal time. The moisture detection runs longer and runs until the room is back to the original dryness before the shower or bath.

I really like the DewStop switch! Can I order a second one separately?

- Yes!

 

FS-325

$59.00

BUY

DewStop Adjustable

FS-325   Bathroom Condensation Control with Light Control

Healthy Home Product™

About

  Blue LED Light, Adjustable DewStop Sensor, Adjustable Fan Timer On, Fan Off, Light On/Off

Electrical Input: 120 volts @ 60Hz
Maximum Fan Load: 1/8th hp or 3 amps
Maximum Light Load: 150W LED/CFL, 400W fluorescent, or 600W incandescent

Best for use in: bathrooms, laundry rooms, sun rooms, spa rooms
May be used to comply with:
ASHRAE 62.2, Energy Star, LEED, Title 24, CalGreen

USA Patent No. US 9,360,228 B2, other USA and international patents pending

Features & Benefits

CONDENSATION SENSORS (adjustable)

- Turns ON the fan when condensation is present and OFF when dry

- Adjust sensors to solve moisture problem

- Helps fight mold
 

QUE™ TECHNOLOGY

- Ultra moisture-sensing adaptive technology (patent pending)
 

COUNTDOWN TIMER (adjustable)

- You choose how long your fan will run

- Great for tenant and family use
 

MANUAL ON/OFF CONTROL

- Manual light control allows you to control bathroom lighting

- Manual fan control for immediate ventilation
 

LED FAN INDICATOR LIGHT

- Lets you know the fan is ON
 

CONCEALED ADJUSTMENT SETTINGS

- Tamper-proof settings cover
 

Installation

 

Easy Install, Quick as 1-2-3: Remove, Connect, Done

FAQ

I only have two black wires, how do I properly connect DewStop?

- One of those wires is in coming power and one is power to the fan. Please refer to the instruction manual for proper wiring of DewStop. Here is the link to the manual.

I do not have a white neutral wire, will DewStop still work without it?

- DewStop fan switch does need a white neutral to operate. Generally there is a type of neutral wire available in your junction box (wall box). Older homes or homes where code was not followed can make it a problem to find a neutral. You will need good knowledge of electrical and an electrical testing device to find a neutral wire. We strongly suggest you use a Licensed and Bonded electrician for this task.

How do I set DewStop's sensitivity for my specific bathroom?

- DewStop comes preset at the 12:00 o'clock position. This is the best place to start. For further instruction on setting your sensitivity levels, please refer to the manual included with your DewStop switch.

The fan comes on too early/too frequently. How can I fix this?

- This means DewStop is set to a higher sensitivity level. Simply turn the sensitivity dial counterclockwise slightly to reduce sensitivity. We suggest small increments at a time.

The fan doesn't come on soon enough, there is already moisture on the walls by the time the fan comes on. How do I fix this?

- If you want DewStop to come on faster, you can rotate the sensitivity dial clockwise. Now DewStop is more sensitive. Move to the right again if needed but only move in small increments until you find the right setting.

I occasionally like to steam up my bathroom. Is it possible to disable the sensor?

- Yes! You can disable the sensing of moisture. Make sure the fan is OFF. Now push down and hold down the button for 15 seconds, then release the button. Moisture sensitivity is now disabled.

If I disable the sensor, can I still turn the fan on/off manually?

- Yes! You can turn ON and OFF your fan manually. Now the fan switch is a manual ON OFF and the timer will continue to work.

How do I turn the sensor back on?

- Yes! It’s easy to turn the moisture sensing back ON. Make sure the fan is OFF. Now push down and hold down the button for 15 seconds, then release the button. Now the moisture sensor is able to detect moisture again.

I use an air conditioner during the day in the summer, then turn it off at night. When I do this, my fan comes on. What is happening?

- Sometimes when the air conditioning is turned OFF the house will start to attract moisture and this is similar to taking a shower or bath. DewStop senses this and turns ON the bath fan. You can avoid this by reducing the sensitivity level. To do this, rotate the dial counterclockwise. We suggest small increments at a time.

The blue LED light is pulsing. What does this mean?

- The pulsing is telling you that DewStop sees moisture and DewStop is running the fan to remove the moisture. When the blue LED is solid (not pulsing on/off the fan is ON and in manual timer mode or in DewStop drying mode. Note: When DewStop senses moisture it will run the fan as long as it takes to dry the room back to the level it saw your room at prior to the moisture. After a shower or bath this is typically 25-35 minutes. THE MANUAL TIMER SETTING DOES NOT CHANGE THE DRYING TIME, it is important that your room is properly dried. The manual timer is for smell removal time only.

I lost my adjustment tool that came with DewStop. Can I use a screw driver to make adjustments?

- Yes you can use any small tool but be careful not to break the small sensitivity and time dials with a large screw driver tool.

What happens if someone turns the fan off before the room is properly dried out?

- DewStop knows your room needs to be dry and if someone turns OFF DewStop its OK. DewStop will sense the moisture again after one minute and turn back ON to finish drying the room.

If I set my Countdown Timer to 5 minutes, does that mean that the fan will only run for 5 minutes when moisture is detected?

- No. The timer is for smell removal time. The moisture detection runs longer and runs until the room is back to the original dryness before the shower or bath.

I really like the DewStop switch! Can I order a second one separately?

- Yes!

 

 

FS-850

$39.00

BUY

Adjustable Fan Timer

FS-850   Bath Fan Timer Control

About

  Blue LED Light, Adjustable Fan Timer On/Fan Off

Electrical Input: 120 volts @ 60Hz
Maximum Fan Load: 1/8th hp or 3 amps

Best for use in: bathrooms, laundry rooms, sun rooms, spa rooms
May be used to comply with:
ASHRAE 62.2, Energy Star, LEED, Title 24, CalGreen

Features & Benefits

COUNTDOWN TIMER (adjustable)

- You choose how long your fan will run

- Great for tenant and family use
 

MINUTES PER HOUR TIMER (adjustable)

- Set the timer to turn the fan ON every hour

- Expels stale air, improving air quality
 

MANUAL ON/OFF CONTROL

- Manual fan control for immediate ventilation
 

LED FAN INDICATOR LIGHT

- Lets you know the fan is ON
 

MEETS ASHRAE 62.2

- Allows any Energy Star fan to be compliant with 62.2

- Credits time back for manual use
 

CONCEALED ADJUSTMENT SETTINGS

- Tamper-proof settings cover
 

Installation

 

Easy Install, Quick as 1-2-3: Remove, Connect, Done

 

FS-875

$46.00

BUY

Adjustable Fan Timer

FS-875   Bath Fan Timer Control with Light Control

About

  Blue LED Light, Adjustable Fan Timer On/Fan Off, Light On/Off

Electrical Input: 120 volts @ 60Hz
Maximum Fan Load: 1/8th hp or 3 amps
Maximum Light Load: 150W LED/CFL, 400W fluorescent, or 600W incandescent

Best for use in: bathrooms, laundry rooms, sun rooms, spa rooms
May be used to comply with:
ASHRAE 62.2, Energy Star, LEED, Title 24, CalGreen

Features & Benefits

COUNTDOWN TIMER (adjustable)

- You choose how long your fan will run

- Great for tenant and family use
 

MINUTES PER HOUR TIMER (adjustable)

- Set the timer to turn the fan ON every hour

- Expels stale air, improving air quality
 

MANUAL ON/OFF CONTROL

- Manual light control allows you to control bathroom lighting

- Manual fan control for immediate ventilation
 

LED FAN INDICATOR LIGHT

- Lets you know the fan is ON
 

MEETS ASHRAE 62.2

- Allows any Energy Star fan to be compliant with 62.2

- Credits time back for manual use
 

CONCEALED ADJUSTMENT SETTINGS

- Tamper-proof settings cover
 

Installation

 

Easy Install, Quick as 1-2-3: Remove, Connect, Done

 

 

SWITCHES

FS-100-W1

$13.95

BUY

Combination Fan Switch

FSR-500   2-Function

About

  Device #1 On/Off, Device #2 On/Off

Electrical Input: 120 volts @ 60Hz
Maximum Total Load: 15 amps

Best for use with: a fan/light combination, a fan/heater combination, or a 2-speed fan

Features & Benefits

VERSATILE

- Compatible with ALL makers of: Fans, Lights, and Heaters
 

SPACE SAVING

- Our 2-rocker switch allows you to control two devices while only taking up one switch location. Maximize your space, create a beautiful look, and control more devices with this simple to install switch.
 

 

FS-100-W1

$14.95

BUY

Combination Fan Switch

FSR-600   3-Function

About

  Device #1 On/Off, Device #2 On/Off, Device #3 On/Off

Electrical Input: 120 volts @ 60Hz
Maximum Total Load: 15 amps

Best for use with: a fan/light/light combination, a fan/light/heater combination, or a 2-speed fan with light

Features & Benefits

VERSATILE

- Compatible with ALL makers of: Fans, Lights, and Heaters
 

SPACE SAVING

- Our 3-rocker switch allows you to control three devices while only taking up one switch's space. Maximize your space, create a beautiful look, and control more devices with this simple to install switch.